Description FEATURES 600 watts per channel and works seamlessly with loudspeakers, DSPs, and controls to create complete commercial sound systems AmpLink input for simplified multichannel digital audio connection to compatible DSPs, reducing terminations and related points of failure Load-independent outputs deliver full channel power to either low-impedance loads (4-8 Ω) or high-impedance (70/100V) loads without bridging I-Share outputs deliver 2x power level by combining the current of two channels Auto-standby mode saves power when audio signal falls below a set threshold, then wakes when audio returns Applications Designed for a wide range of applications, including: Retail stores Restaurants and bars Hospitality venues Conference centers Schools Auxiliary zones SPECIFICATIONS TECHNICAL SPECIFICATION AMPLIFICATION Channel Separation (Crosstalk) > 80 dB at 1 kHz, > 65 dB at 20 kHz Dynamic Range ≥ 100 dB at rated power, A-weighted Frequency Response 20 Hz – 20 kHz (±1 dB) at 1 W, 4–8 Ω / 20 Hz – 20 kHz (±1 dB) at 1 W with 50 Hz high-pass filter, 70/100V Gain, High-Impedance 35 dB, 70V mode / 38 dB, 100V mode Gain, Low-Impedance 35 dB Maximum Peak Power, Symmetrical 1200 W Number of Channels 2 Power Class Class D Rated Power, Symmetrical 600 W THD N < 0.04% at 1 kHz, 4–8 Ω, 70V/100V AUDIO INPUTS, ANALOG Channels 2 balanced Connectors (1) 6-pin Euroblock Input Impedance 10 kΩ Maximum Input Level 22 dBu at 14 dBu sensitivity Sensitivity -10 dBV, 4 dBu, 14 dBu AUDIO INPUTS/OUTPUTS, DIGITAL Channels 8 AmpLink in, 8 AmpLink thru Connectors (1) RJ-45 AmpLink in / (1) RJ-45 AmpLink thru Type 6-pin Euroblock AUDIO OUTPUTS, ANALOG Channels 2 Connectors (1) 4-terminal block COMPLIANCE EMC This product meets all EN55103-2 immunity requirements for E2 electromagnetic environment. ELECTRICAL Mains Connector IEC 60320-C14 inlet Mains Voltage 100–240 VAC (±10%), 50/60 Hz Power Consumption 25 W auto-standby, 570 W maximum INDICATORS AND CONTROLS Controls, Front Panel (1) power button Controls, Rear Panel Mute, output attenuators, DIP switches for amplifier configuration, input selector, update port, gain/sensitivity LED Status Indicators (1) power/status LED, (4) input signal LEDs, (4) output limit LEDs INTEGRATED DSP DSP-Enabled No PHYSICAL Colors Gray Cooling System Microprocessor-controlled variable-speed fans, front-to-back air flow Mounting/Rigging Provisions Rack-mounting Net Weight 13.7 lb (6.2 kg) Operating Temperature 0 °C to 40 °C (32 °F to 104 °F) Product Dimensions (H×W×D) 1.7 in × 19.0 in × 16.5 in (44 mm × 483 mm × 420 mm) Rack Spaces 1 Shipping Weight 18.1 lb (8.2 kg) WARRANTY PERIOD 5 years Technical Data Sheet
